| 66388L Franke Slewing Ring Bearings | Pa:26.7 kN; End plug (suffix Y):EPR 13; h:61.119 mm; P120°:73.8 kN; RG:1/2 NPT; Cap bolt recommended tightening torque:1220 N·m; A1:133.35 mm; J min.:371.475 mm; Mass pillow block:69.3 kg; Ca:89.789 mm; P90°:113 kN; Initial grease fill:382.73 g; S:4.763 mm; P60°:189 kN; Labyrinth ring:2 x LOR 110; Appropriate attachment bolt size G:0.875 in; H2:60.325 mm; J1:82.55 mm; H:287.337 mm; |
| 75039A Franke Slewing Ring Bearings | thickness:5/32 in; thickness tolerance:±0.001 in; length tolerance:±0.001 in; width tolerance:+0.005/-0.; material:Steel; finish:No Finish; length:18 in; meets industry standards by:ASTM, SAE; width:1-3/4 in; industry standards met:ASTM-A-681, SAE J-43; |
| 31 0941 01 Rollix Slewing Ring Bearings | SKU:6028-2z-fag; Cage Type:Steel; B:33mm; Fatigue Load Rating (kN):4.95; Seals or Shields:Two Metal Shields; Limiting Speed Rating (r/min):2800; Dynamic Load Rating (kN):108; Weight:3.65 KGS; Reference Speed Rating (r/min):4350; D:210mm; Clearance:Standard; Static Load Rating (kN):108; Availability:In Stock; d:140mm; |
| 75074A Franke Slewing Ring Bearings | d:1.1875 in; mounting type:Three-Bolt Bracket S; duty type:Standard Duty; length through bore:1.500 in; radial dynamic load capacity:3750 lbf; horizontal bolt spacing:1-7/8 in; bore type:Round; seal type:Contact with Flinger; bolt size:3/8; lubrication type:Lubrication Fitting; series:MUCFB200NP; housing material:Cast Iron - Nickel P; shaft centerline height:2-1/16 in; radial static load capacity:2030 lbf; |
| 6 1790 09 Rollix Slewing Ring Bearings | base to bore centerline:2-1/8 in; base width:4 in; housing construction:Split Pillow Block; B:5 in; mounting:Four-Bolt Base; D:7-3/4 to 8-1&#x; d:2-7/16 in; overall height:4-1/4 in; standards met:UL, AFBMA, AGMA, ASM; duty type:Standard Duty; finish/coating:Uncoated; bearing material:Babbitt; lubrication type:Cannot Be Relubricat; expansion type:Non-Expansion Bearin; manufacturer catalog number:004072; |
| 73119L Franke Slewing Ring Bearings | manufacturer catalog number:716141; B:1.5000 in; slot width:0.5313 in; unit type:Side Mount; operating temperature range:250°; housing material:Cast Iron; lubrication type:Lubrication Fitting; dynamic load capacity:2801 lb; seal type:Contact Seal; locking device:Set Screw; replacement bearing:2-1C RM; overall length:3.8125 in; slot spacing:3.0000 in; duty type:Standard Duty; series:ST; d:1.0000 in; |
| 75081A Franke Slewing Ring Bearings | finish/coating:Uncoated; closure type:Open; axial dynamic load capacity:15820 lb; inside diameter:7.5000 in; bearing material:Steel; cage material:Brass/Non-Metal; internal clearance:C0; standards met:AISI 52100; radial static load capacity:13680 lb; radial dynamic load capacity:10410 lb; inner ring width:1 in; series:KG; axial static load capacity:34200 lb; B:1.0000 in; D:9.5000 in; fillet radius:0.08 in; |
| 75059A Franke Slewing Ring Bearings | material:Steel; series:MB-00; tang thickness:1.5 mm; face diameter:90 mm; key width:8 mm; d:75 mm; outside diameter over tangs:104 mm; compatible lock nut number:KM15; |
| 39 0941 01 Rollix Slewing Ring Bearings | Oil Limiting Speed (r/min):4000; D:170mm; Static Load Rating (kN):27.1; Cage Type:Steel; Dynamic Load Rating (kN):64; Weight:0.02 KGS; Clearance:C3; Grease Limiting Speed (r/min):3400; d:95mm; Availability:In Stock; Seals or Shields:Open Type; B:32mm; SKU:1219kjc3-nsk; |
| 73010L Franke Slewing Ring Bearings | thread direction:Left Hand; ball material:Alloy Steel Heat Tre; rod end type:Male Threaded; housing material:Carbon Steel; race material:Brass; grade:Precision; d:0.5000 in; lubrication type:Zerk Fitting; |
| 7 1606 02 Rollix Slewing Ring Bearings | SKU:6003rs-timken; Cage Type:Steel; Static Load Rating (kN):3.3; Seals or Shields:Single Rubber Seal; B:10mm; Limiting Speed Rating (r/min):19000; Weight:0.03 KGS; Availability:In Stock; Dynamic Load Rating (kN):6; D:35mm; Reference Speed Rating (r/min):28000; Clearance:Standard; d:17mm; |
| 75035A Franke Slewing Ring Bearings | Seals or Shields:Open Type; Dynamic Load Rating (kN):13.3; Weight:0.02 KGS; Reference Speed Rating (r/min):28000; d:30mm; Cage Type:Steel; Availability:In Stock; Limiting Speed Rating (r/min):17000; Static Load Rating (kN):8.3; Fatigue Load Rating (kN):0.355; Condition:New; SKU:w6006-skf; Clearance:Standard; D:55mm; B:13mm; |