| 66179L Franke Slewing Ring Bearings | cage material:Steel; dynamic load capacity:25500 lbf; series:NK; needle bearing type:Machined Bearing wit; closure type:Open; d:105 mm; maximum rpm:4300 RPM; lubrication hole type:Lubrication Groove &; precision rating:Not Rated; static load capacity:56000 lbf; B:36 mm; flanges:With Flanges; D:125 mm; |
| 8 0823 08 Rollix Slewing Ring Bearings | d:0.625 Inch; SKU:mjt5/8-r&m; B:0.625 Inch; Weight:0.02 KGS; Clearance:Standard; Seals or Shields:Open Type; Availability:In Stock; D:1.813 Inch; |
| 69711L Franke Slewing Ring Bearings | mounting:Four-Bolt Base; seal type:Clearance/Non-C; standards met:ANSI/ABMA STD 9; radial dynamic load capacity:118000 lb; series:2000; maximum rpm:2050 RPM; D:12 to 13 in; expansion type:Expansion Bearing &#; finish/coating:Powder Coated; overall height:8.6250 in; B:5-3/16 in; radial static load capacity:127500 lb; overall length:15.2500 in; base width:4-1/2 in; base to bore centerline:4.2500 in; |
| 73045L Franke Slewing Ring Bearings | manufacturer catalog number:29502-3434; harmonization code:3926904500.US; misalignment tolerance:0.020 in; typical application:Exceptional Bearing; maximum shaft surface speed:4500 fpm; lip material:Labyrinth; D:5.2800 in; width:0.7500 in; Weight:0.4 lb; construction description:ISO-GARD® Flange; pressure tolerance:Ambient; continuous temperature range:-22 to 400°F; shaft diameter:3.3750 in; |
| 36 1091 01 Rollix Slewing Ring Bearings | cup width:1.8750 in; lubrication hole type:No Hole; finish/coating:Uncoated; compatible cone:864, 855, 861, 866,; single or double cup:Single Cup; flange type:Non-Flanged Cup; series:855; manufacturer upc number:053893095684; D:7.5000 in; |
| 35 0941 01 Rollix Slewing Ring Bearings | B:23mm; Dynamic Load Rating (kN):21.7; d:35mm; Cage Type:Plastic; Availability:In Stock; Weight:0.02 KGS; Seals or Shields:Open Type; D:72mm; SKU:2207etnc3-nsk; Grease Limiting Speed (r/min):8500; Clearance:C3; Oil Limiting Speed (r/min):10000; Static Load Rating (kN):6.6; |
| 73003L Franke Slewing Ring Bearings | Availability:In Stock; Clearance:C3; Static Load Rating (kN):14500; Cage Type:Plastic; Dynamic Load Rating (kN):23100; D:52mm; d:20mm; B:22.2mm; Oil Limiting Speed (r/min):1200; Weight:0.23 KGS; Grease Limiting Speed (r/min):8500; Seals or Shields:Open Type; SKU:3304btnc3-nsk; |
| 7 1606 02 Rollix Slewing Ring Bearings | SKU:6003rs-timken; Cage Type:Steel; Static Load Rating (kN):3.3; Seals or Shields:Single Rubber Seal; B:10mm; Limiting Speed Rating (r/min):19000; Weight:0.03 KGS; Availability:In Stock; Dynamic Load Rating (kN):6; D:35mm; Reference Speed Rating (r/min):28000; Clearance:Standard; d:17mm; |
| 75037A Franke Slewing Ring Bearings | standards met:UL, AFBMA, AGMA, ASM; D:10.32 to 11.62 in; B:2.56 in; lubrication type:Lubrication Fitting; radial dynamic load capacity:21451 lb; bore type:Round; housing material:Cast Iron; locking device:Set Screw; d:3.5000 in; finish/coating:Black Oxide; mounting:Two-Bolt Base; duty type:Medium Duty; manufacturer catalog number:126824; seal type:Contact/Lip; radial static load capacity:16641 lb; |
| 73015L Franke Slewing Ring Bearings | expansion type:Non-Expansion Bearin; series:T; lubrication type:Lubrication Fitting; maximum rpm:4000 RPM; operating temperature range:Maximum of +225; seal type:Contact Seal; finish/coating:Uncoated; d:1.3125 in; D:5.1250 in; length through bore:2-1/8 in; mounting type:Two-Bolt Flange; housing material:Cast Iron; bore type:Round; duty type:Standard Duty; locking device:Eccentric Collar; |
| 75038A Franke Slewing Ring Bearings | A2:149.225 mm; Stabilizing ring:SR-18-15; A1:98.425 mm; P60°:101 kN; H2:44.45 mm; PG:1/8 NPT; Cap bolt:2 x 5/8-11 UNC; Initial grease fill:141.75 g; Pa:14.1 kN; Bearing:23218 CC/W33; Labyrinth ring (dc shaft position):LOR 191; P180°:42.3 kN; H:192.484 mm; Appropriate attachment bolt size G:0.625 in; h:38.1 mm; Da:160 mm; L:349.25 mm; Housing:SAW 218; J1:53.975 mm; db:104.775 mm; |
| 73093L Franke Slewing Ring Bearings | Cap bolt, SAE grade:5; Da:339.999 mm; Housing:SAF 044 KA; Eye bolt:2 x 1/2-13 UNC; h:57.15 mm; End plug (suffix Y):EPR 23; P120°:107 kN; N1:34.925 mm; da:203.2 mm; R1:120.65 mm; Labyrinth ring:2 x LOR 168; Stabilizing ring:2 x 36053-140; A1:190.5 mm; P150°:94.3 kN; Mass pillow block:153 kg; P90°:173 kN; RG:1 NPT; Cap bolt:4 x 7/8-9 UNC; P60°:290 kN; PG:1/4 NPT; |