| 66141L Franke Slewing Ring Bearings | housing material:Cast Iron; d:1-3/8 in; operating temperature range:+32 to +20; flange mounting type:Four-Bolt Square; bearing material:Graphite; overall depth:1-11/16 in; expansion type:Non-Expansion Bearin; series:3200; lubrication type:Lubrication Fitting; finish/coating:Powder Coated; overall height:4-5/8 in; D:3.6250 in; B:4.6250 in; |
| 34 0941 01 Rollix Slewing Ring Bearings | maximum rpm:4000 RPM; radial static load capacity:4590 lb; seal type:Contact/Lip; lubrication type:Lubrication Fitting; d:1.7500 in; mounting:Two-Bolt Base; finish/coating:Nickel Plated; locking device:Set Screw; overall length:7.2500 in; overall height:4.3125 in; radial dynamic load capacity:5670 lb; series:200; B:2-1/32 in; housing material:Cast Iron; expansion type:Non-Expansion Bearin; |
| 66150L Franke Slewing Ring Bearings | flanges:(2) Outer; closure type:Open; finish/coating:Uncoated; bore type:Straight; d:32 mm; internal clearance:C0; precision rating:RBEC 1 (ISO Cla; series:AD53; cage material:Brass; |
| 75018A Franke Slewing Ring Bearings | dynamic load capacity:7891 lb; manufacturer catalog number:076085; overall height:4-3/4 in; rod hole diameter:7/8 in; slot spacing:3.9850 in; d:1.6875 in; compatible frame number:NS400; expansion type:Non-Expansion Bearin; housing material:Cast Iron; unit type:Side Mount; lubrication type:Lubrication Fitting; overall length:5.44 in; seal type:Triple Lip with Flin; maximum rpm:3600 RPM; slot width:0.3130 in; |
| 38 1091 01 Rollix Slewing Ring Bearings | Static Load Rating (kN):71; B:22mm; Cage Type:Plastic; Availability:In Stock; Weight:0.79 KGS; Clearance:Standard; Speed Rating (r/min):13200; d:60mm; D:110mm; Seals or Shields:Open Type; SKU:2mm212wicrduh-timken; Dynamic Load Rating (kN):48.9; |
| 66194L Franke Slewing Ring Bearings | B:4-33/64 in; maximum rpm:1750 RPM; housing construction:Split Pillow Block; seal type:Contact/Lip; radial dynamic load capacity:9630 lb; D:8-1/16 to 9-11&; standards met:ABMA, ISO; series:ERPB; bearing type:Tapered Roller; operating temperature range:-20 to +220 &de; housing material:Cast Iron; overall height:6.5625 in; replacement bearing:ERCI-212; overall length:11.7500 in; lubrication type:Lubrication Fitting; |
| 27 0941 01 Rollix Slewing Ring Bearings | lubrication type:Lubrication Fitting; duty type:Standard Duty; locking device:Eccentric Collar; mounting type:Four-Bolt Piloted; length through bore:48.4 mm; B:125 mm; replacement bearing:UG206; bolt size:M10; series:UGFC200; d:30 mm; unit standoff:40.1 mm; seal type:Contact with Flinger; bolt circle diameter:100 mm; radial dynamic load capacity:2000 kgf; radial static load capacity:1150 kgf; bore type:Round; |
| 28 0941 01 Rollix Slewing Ring Bearings | d2:32.1 mm; r1,2 min.:0.6 mm; Calculation factor f2D:1.09; d:25 mm; Preload class A GA:35 N; K:0.5 mm; Db max.:45 mm; r3,4 min.:0.3 mm; C1:7.25 mm; B:12 mm; Calculation factor f0:9.6; Calculation factor f2C:1.05; Static axial stiffness, preload class B:37 N/µm; Reference grease quantity Gref:1.02 cm³; Basic dynamic load rating C:9.56 kN; Mass bearing:0.07 kg; Basic static load rating C0:5.2 kN; |
| 66148L Franke Slewing Ring Bearings | Labyrinth ring (dc shaft position):LOR 142; Stabilizing ring:SR-32-0; Cap bolt:7/8-9 UNC; Ca:89.789 mm; da:160 mm; Bearing limiting speed:2800 r/min; H:338.137 mm; Pa:93.9 kN; PG:1/4 NPT; A2:225.425 mm; Da:289.999 mm; h:52.388 mm; Initial grease fill:793.8 g; Labyrinth ring (db shaft position):LOR 156; ba:70.644 mm; P60°:345 kN; Cap bolt recommended tightening torque:813.5 N·m; R1:104.775 mm; |
| 75019A Franke Slewing Ring Bearings | D:3 in; bearing material:Carbon; d:1-1/8 in; operating temperature range:+250 to +1; finish/coating:Uncoated; series:LT1000; locking device:None; B:1-3/16 in; |
| 73071L Franke Slewing Ring Bearings | diameter:3/4 in; manufacturer upc number:662679978822; series/system compatibility:Proto-Ease; capacity:10 ton; thread size:7/16-14 in; type:Jaw Lock Screw; |
| 75039A Franke Slewing Ring Bearings | thickness:5/32 in; thickness tolerance:±0.001 in; length tolerance:±0.001 in; width tolerance:+0.005/-0.; material:Steel; finish:No Finish; length:18 in; meets industry standards by:ASTM, SAE; width:1-3/4 in; industry standards met:ASTM-A-681, SAE J-43; |