| 75042A Franke Slewing Ring Bearings | duty type:Normal Duty; overall height:4.0313 in; slot width:0.5313 in; manufacturer upc number:8865590080298; housing material:Cast Iron; compatible bore diameter:35 mm, 1.3125 in, 1.; slot spacing:3.5000 in; unit type:Side Mount; rod hole diameter:0.8594 in; overall length:5.0625 in; |
| 73023L Franke Slewing Ring Bearings | Clearance:Standard; B:40mm; Availability:In Stock; SKU:3mm224wicrdum-timken; D:215mm; Seals or Shields:Open Type; Speed Rating (r/min):6000; Cage Type:Plastic; d:120mm; Dynamic Load Rating (kN):173.5; Weight:5.36 KGS; Static Load Rating (kN):200.5; |
| 73064L Franke Slewing Ring Bearings | overall height:175 mm; lubrication type:Lubrication Fitting; expansion type:Non-Expansion Bearin; overall length:292 mm; series:UCP200NP; seal type:Contact with Slinger; D:220 mm to 244 mm; locking device:Set Screw; housing material:Cast Iron - Nickel P; replacement bearing:UC216; radial static load capacity:5400 kgf; mounting:Two-Bolt Base; bolt size:M20; bore type:Round; base width:78 mm; base to bore centerline:3.5000 in; |
| 75011A Franke Slewing Ring Bearings | outer ring width:2.55 in; precision rating:Not Rated; d:11.0222 in; closure type:Open; bore type:Round; D:16.5300 in; finish/coating:Uncoated; B:2.5591 in; series:280; internal clearance:C0; |
| 23 0841 01 Rollix Slewing Ring Bearings | overall length:6.5000 in; duty type:Normal Duty; series:NP; expansion type:Non-Expansion Bearin; replacement bearing:2-13; radial static load capacity:2567 lb; base width:1-7/8 in; operating temperature range:-20 to +220 &de; mounting:Two-Bolt Base; locking device:Set Screw; radial dynamic load capacity:4381 lb; B:1-1/2 in; housing material:Cast Iron; D:4-7/16 to 5-1&#; finish/coating:Uncoated; |
| 29 0941 01 Rollix Slewing Ring Bearings | compatible frame number:WS300; lubrication type:Lubrication Fitting; finish/coating:Uncoated; series:205; overall length:96.8 mm; B:3-5/8 in; locking device:Eccentric; manufacturer catalog number:131208; dynamic load capacity:13995 lb; rod hole diameter:15.9 mm; housing material:Cast Iron; seal type:Contact with Flinger; slot width:0.5313 in; unit type:Side Mount; d:1.0000 in; expansion type:Non-Expansion Bearin; |
| 39 0941 01 Rollix Slewing Ring Bearings | Oil Limiting Speed (r/min):4000; D:170mm; Static Load Rating (kN):27.1; Cage Type:Steel; Dynamic Load Rating (kN):64; Weight:0.02 KGS; Clearance:C3; Grease Limiting Speed (r/min):3400; d:95mm; Availability:In Stock; Seals or Shields:Open Type; B:32mm; SKU:1219kjc3-nsk; |
| 1 3031 Rollix Slewing Ring Bearings | manufacturer catalog:Click here; cage material:Nylon; duty type:Medium Duty; bore type:Round; compatible shaft diameter:2.1875 in; mounting type:Four-Bolt Flange; operating temperature range:200° °F; housing construction:Cast Iron; misalignment angle:1-1/2 °; manufacturer upc number:662798254371; maximum rpm:2500 rpm; application:General Industrial; series:FB350; locking device:Set Screw; |
| 73039L Franke Slewing Ring Bearings | seal type:Single Lip Contact; housing material:Cast Iron; duty type:Intermediate Duty; replacement bearing:VS-131; bolt size:0.5625 in; maximum operating temperature:200 °F; radial dynamic load capacity:7889 lb; radial static load capacity:5216 lb; length through bore:1.5469 in; B:4.5625 in; manufacturer catalog number:767865; mounting type:Two-Bolt Flange; inner ring width:1.5469 in; finish/coating:Gray Painted; |
| 2 1715 Rollix Slewing Ring Bearings | compatible bore diameter:5-15/16 in; seal material:Non-Metallic; seal type:Labyrinth; |
| 66172L Franke Slewing Ring Bearings | Db max.:35.6 mm; D:37 mm; Calculation factor f:1.05; r1,2 min.:0.3 mm; Calculation factor fHC:1.04; Calculation factor f1:1; Ball diameter Dw:4.762 mm; d1:25.6 mm; db max.:25.1 mm; Calculation factor f2A:1; Calculation factor f2B:1.07; Preload class A GA:25 N; Number of balls z:15; Basic dynamic load rating C:6.05 kN; da max.:25.1 mm; Static axial stiffness, preload class D:62 N/µm; Mass bearing:0.033 kg; |
| 75043A Franke Slewing Ring Bearings | a:4.5 mm; Tolerance shaft:e7; Tolerance housing:H7; Specific static load factor K0:45 N/mm²; d:70 mm; Mass bushing:1.49 kg; Coefficient of friction µ max.:0.15; D:85 mm; Coefficient of friction µ min.:0.08; Permissible sliding velocity v max.:0.5 m/s; B:90 mm; α:124 °; Specific dynamic load factor K:25 N/mm²; Permissible sliding velocity v min.:0 m/s; h:71.5 mm; |