| No. | Brand | d | Z | A | J | S | e | H | C |
| DC1500#Laminator | INA | - | - | - | - | - | - | 57.2 mm | - |
| Kxf0dkcaa00 | INA | 65 mm | 51 mm | 56 mm | 150 mm | - | - | - | 57.2 kN |
| Cm402 | INA | - | 56 mm | - | - | - | - | 30.2 mm | - |
| (J75-1601030-3) | - | - | - | - | - | - | - | - | - |
| (CK61200) | - | - | - | 28 mm | - | - | - | - | 14 kN |
| ISO9001, | - | - | - | - | - | - | - | - | - |
| (CK61100) | - | - | - | 27 mm | - | 9.5 mm | 15.6 mm | - | 25.7 kN |
| DC600#Laminator | INA | - | - | - | - | - | - | - | - |
| DC600#Laminator for Hard Biscuit Forming | Designation of bearing:UC328G2L3; L3:255 mm; L1:315 mm; s1:72.5 mm; A1:50 mm; SW:10 mm; H2:230 mm; B:145 mm; Recommended tightening torque for set screw:120 Nm; L2:52 mm; |
| Automatic Electrical Sponge Roller Coater for Water Base Paint | Da min.:736 mm; Basic dynamic load rating C:5600 kN; s1 max.:45.7 mm; Ca min.:2.7 mm; Operating clearance factor k2:0.106; Misalignment factor k1:0.116; Fatigue load limit Pu:720 kN; B:195 mm; D1 ≈:761 mm; d:560 mm; |
| Insulated Core Wire, Electronic Wire, Power Cable Extrusion Line | C:14 kN; L3:38 mm; A5:17.4 mm; L:99 mm; B:34.8 mm; Recommended tightening torque for set screw:3.7 Nm; d1:37.4 mm; Designation of housing:EHE205-; T max.:100 °C; E:22 mm; |
| Core Wire Insulation Extruding Machines | T max.:100 °C; G:M6x1; A1:36 mm; S:14.9 mm; E:25 mm; A:68 mm; Designation of bearing:US212G2; s1:26.85 mm; H:69.9 mm; d:60 mm; |
| Original Japan Panasonic Kxf0dkcaa00 745X8.5X0.65mm Flat Conveyor Belt | N:18mm; d:65 mm; Z:51 mm; C:57.2 kN; A:56 mm; T min.:-20 °C; J:150 mm; G:R1/8"; Designation of bearing:UC213G2; A1:18 mm; |
| Photovoltaic Halogen-Free Cable Manufacturing Machine | S:4.763 mm; H2:60.325 mm; PG:1/4 NPT; P120°:125 kN; RG:1/2 NPT; da:114.3 mm; L:466.725 mm; Initial grease fill:382.73 g; Labyrinth ring:2 x LOR 118; Max. speed for PosiTrac Plus seal:1300 r/min; |
| Insulated Core Wire, Electronic Wire, Power Wire Extrusion Machines | Characteristic cage frequency, FTF:0.42 Hz; Mass:0.38 kg; Min operating temperature, Tmin:-20 °C; F:25.5 mm; C1:0.8 mm; Bearing with/without cage:Sans; Radial clearance class:CN; Brand:NTN; D:47 mm; Characteristic outer ring frequency, BPF0:7.94 Hz; |
| High Quality Horizontal CNC Lathe with Full Metal Shield for Tyre Mold (CK61100) | T min.:-20 °C; Designation of bearing:ES207-23G2T20; A:27 mm; C:25.7 kN; S:9.5 mm; G:R1/8"; N:13,5mm; e:15.6 mm; Designation of housing:FTE207-; d1:51.1 mm; |
| Gauge Roll for Biscui Forming | T min.:-20 °C; L1:54 mm; Z:60 mm; H1:19 mm; Recommended tightening torque for set screw:8 Nm; Designation of open end cover:SCOU207-22; Designation of housing:P207N-; G:M6x1; H:47.6 mm; d:34.92 mm; |
| Large CNC Lathe Exported to Chile Used for Machining Oil Pipe Connection (CK61200) | s1:24.2 mm; Weight:0.69 kg; T min.:-40 °C; C:14 kN; B1:30.9 mm; L:99 mm; A:28 mm; L3:38 mm; G:R1/8"; G1:M20; |
Low Smoke Zero Halogen Electronic Wire and Cable Extrusion Line Video