| High Precision Double Roller Coater for Furniture, Wood, Plywood, MDF | S:10.2 mm; Recommended tightening torque for set screw:11.5 Nm; Weight:1.92 kg; Designation of open end cover:SCO209-45; d:45 mm; J:148 mm; G:M6x1; Designation of bearing:US209G2T04; B:41.2 mm; A2:53 mm; |
| Insulated Core Wire, Electronic Wire, Power Cable Extrusion Line | C:14 kN; L3:38 mm; A5:17.4 mm; L:99 mm; B:34.8 mm; Recommended tightening torque for set screw:3.7 Nm; d1:37.4 mm; Designation of housing:EHE205-; T max.:100 °C; E:22 mm; |
| Automatic Electrical Sponge Roller Coater for Water Base Paint | Da min.:736 mm; Basic dynamic load rating C:5600 kN; s1 max.:45.7 mm; Ca min.:2.7 mm; Operating clearance factor k2:0.106; Misalignment factor k1:0.116; Fatigue load limit Pu:720 kN; B:195 mm; D1 ≈:761 mm; d:560 mm; |
| Simens Moter Automatic Bale Opener for PU Leather Substrate Making Ce / ISO9001, Bale Opener Machine, Automatic Bale Opener | f0:13.2; da min:64 mm; Enclosure Type:Contact Seal; Fatigue limit load, Cu:2.05 kN; Minimum Buy Quantity:N/A; Radial clearance class:C3; Characteristic cage frequency, FTF:0.38 Hz; Manufacturer Name:NTN; B:29 mm; Weight / Kilogram:1.346; |
| SBR/NBR/EPDM/PU Rubber Roller/Polyurethane Roller | s1:15.5 mm; Designation of bearing:UC203G2T04; Recommended tightening torque for set screw:5.5 Nm; J:52 mm; C:12.8 kN; Weight:0.61 kg; T min.:-40 °C; T max.:100 °C; N:M10; C0:6.65 kN; |
| Electrical Drive Single Roller Coating Machines or Wooden Furniture | Z:68.6 mm; C:43.55 kN; G:R1/8"; S:11.8 mm; L:162 mm; T min.:-20 °C; e:31 mm; Dz:110 mm; C0:29.2 kN; Weight:3.66 kg; |
| Insulated Core Wire, Electronic Wire, Power Wire Extruding Machines | A1:56.363 mm; B:4.763 mm; Hexagonal head bolts:2 x 5/8-11x1-1/4; A3:47.625 mm; L:259.563 mm; A2:38.887 mm; Mass locking plate:0.55 kg; |
| DC1500#Laminator for Hard Biscuit Forming | H:57.2 mm; H2:115 mm; B:43.5 mm; T min.:-40 °C; C0:23.2 kN; Designation of bearing:US210-30G2T04; Designation of housing:PE210N-; Weight:2.6 kg; A1:34 mm; Recommended tightening torque for set screw:8 Nm; |
| Gauge Roll for Biscui Forming | T min.:-20 °C; L1:54 mm; Z:60 mm; H1:19 mm; Recommended tightening torque for set screw:8 Nm; Designation of open end cover:SCOU207-22; Designation of housing:P207N-; G:M6x1; H:47.6 mm; d:34.92 mm; |
| PVC/PE/PU/Nylon Wire and Cable Extruding Machines | L:108 mm; C:19.5 kN; A:33.5 mm; G:R1/8"; Designation of bearing:US206-20G2; d:31.75 mm; T max.:100 °C; A1:12 mm; s1:15 mm; S:8 mm; |