| Photovoltaic Halogen-Free Cable Manufacturing Machine | S:4.763 mm; H2:60.325 mm; PG:1/4 NPT; P120°:125 kN; RG:1/2 NPT; da:114.3 mm; L:466.725 mm; Initial grease fill:382.73 g; Labyrinth ring:2 x LOR 118; Max. speed for PosiTrac Plus seal:1300 r/min; |
| Electrical Drive Single Roller Coating Machines or Wooden Furniture | Z:68.6 mm; C:43.55 kN; G:R1/8"; S:11.8 mm; L:162 mm; T min.:-20 °C; e:31 mm; Dz:110 mm; C0:29.2 kN; Weight:3.66 kg; |
| Photovoltaic, Non-Halogen Wire and Cable Extrusion Machines | Mass:0.04 kg; ra max:0.3 mm; Min operating temperature, Tmin:-20 °C; f0:16.1; d:45 mm; Nlim (grease):11,000 rpm; da min:47 mm; Characteristic outer ring frequency, BPF0:11.65 Hz; Brand:NTN; Da max:56 mm; |
| Large CNC Lathe Exported to Chile Used for Machining Oil Pipe Connection (CK61200) | s1:24.2 mm; Weight:0.69 kg; T min.:-40 °C; C:14 kN; B1:30.9 mm; L:99 mm; A:28 mm; L3:38 mm; G:R1/8"; G1:M20; |
| Original Japan Panasonic Kxf0dkcaa00 745X8.5X0.65mm Flat Conveyor Belt | N:18mm; d:65 mm; Z:51 mm; C:57.2 kN; A:56 mm; T min.:-20 °C; J:150 mm; G:R1/8"; Designation of bearing:UC213G2; A1:18 mm; |
| Photovoltaic Halogen-Free Cable Extruding Line | r, r1,2 min.:0.6 mm; B:18 mm; d:30 mm; Mass inner ring:0.05 kg; F:37 mm; |
| Photovoltaic Halogen-Free Cable Extruder Line | Nlim (grease):5,500 rpm; Dw:3.5 mm; Characteristic cage frequency, FTF:0.44 Hz; Brand:NTN; Characteristic inner ring frequency, BPFI:8.89 Hz; Characteristic outer ring frequency, BPF0:7.11 Hz; Mass:0.07 kg; Lw:25.4 mm; Minimum Buy Quantity:N/A; D:37 mm; |
| Simens Moter Automatic Bale Opener for PU Leather Substrate Making Ce / ISO9001, Bale Opener Machine, Automatic Bale Opener | f0:13.2; da min:64 mm; Enclosure Type:Contact Seal; Fatigue limit load, Cu:2.05 kN; Minimum Buy Quantity:N/A; Radial clearance class:C3; Characteristic cage frequency, FTF:0.38 Hz; Manufacturer Name:NTN; B:29 mm; Weight / Kilogram:1.346; |
| Photovoltaic Halogen-Free Cable Making Equipment | S:17.5 mm; C0:15.2 kN; Recommended tightening torque for set screw:8 Nm; C1:5.8 mm; B:42.9 mm; G:5/16-24UNF; D:72 mm; d:36.51 mm; T max.:100 °C; T min.:-40 °C; |
| DC600#Laminator for Hard Biscuit Forming | Designation of bearing:UC328G2L3; L3:255 mm; L1:315 mm; s1:72.5 mm; A1:50 mm; SW:10 mm; H2:230 mm; B:145 mm; Recommended tightening torque for set screw:120 Nm; L2:52 mm; |