| Electrical Drive Single Roller Coating Machines or Wooden Furniture | Z:68.6 mm; C:43.55 kN; G:R1/8"; S:11.8 mm; L:162 mm; T min.:-20 °C; e:31 mm; Dz:110 mm; C0:29.2 kN; Weight:3.66 kg; |
| Separating Machine for Hard Biscuit | d:41.28 mm; Designation of housing:PE209N-; Recommended tightening torque for set screw:8 Nm; s1:24.6 mm; N1:29 mm; T max.:100 °C; C0:20.8 kN; S:19 mm; Z:24.5 mm; A1:32 mm; |
| Photovoltaic Halogen-Free Cable Making Equipment | S:17.5 mm; C0:15.2 kN; Recommended tightening torque for set screw:8 Nm; C1:5.8 mm; B:42.9 mm; G:5/16-24UNF; D:72 mm; d:36.51 mm; T max.:100 °C; T min.:-40 °C; |
| Photovoltaic Halogen-Free Cable Extruding Machines for Wire and Cable | Inventory:0.0; Manufacturer Name:NTN; Category:Single Row Ball Bear; Brand:NTN; Weight / LBS:8.022; Inch - Metric:Metric; Snap Ring:No; Internal Special Features:No; Weight / Kilogram:3.64; |
| Simens Moter Automatic Bale Opener for PU Leather Substrate Making Ce / ISO9001, Bale Opener Machine, Automatic Bale Opener | f0:13.2; da min:64 mm; Enclosure Type:Contact Seal; Fatigue limit load, Cu:2.05 kN; Minimum Buy Quantity:N/A; Radial clearance class:C3; Characteristic cage frequency, FTF:0.38 Hz; Manufacturer Name:NTN; B:29 mm; Weight / Kilogram:1.346; |
| Gauge Roll for Hard Biscuit | Basic dynamic load rating C:11800 kN; Limiting speed:560 r/min; d:630 mm; Mass bearing:1056 kg; Da min.:868 mm; ra max.:6 mm; s1 max.:23.8 mm; D:1030 mm; Misalignment factor k1:0; Reference speed:400 r/min; |
| Insulated Core Wire, Electronic Wire, Power Wire Extrusion Machines | Characteristic cage frequency, FTF:0.42 Hz; Mass:0.38 kg; Min operating temperature, Tmin:-20 °C; F:25.5 mm; C1:0.8 mm; Bearing with/without cage:Sans; Radial clearance class:CN; Brand:NTN; D:47 mm; Characteristic outer ring frequency, BPF0:7.94 Hz; |
| Cable Sheath Extruding Machines for Wire and Cable | Basic dynamic load rating C:100 kN; l7 min.:50 mm; d:40 mm; r1 min.:0.6 mm; α:6 °; Basic static load rating C0:166 kN; l3 min.:65 mm; l4 max.:194 mm; Material constant KM:330; G:M 42x3; |
| Thin-Wall Nylon Sheath Cable Extrusion Production Line | D:42 mm; B:7 mm; Characteristic rolling element frequency, BSF:10.19 Hz; Min operating temperature, Tmin:-25 °C; Characteristic inner ring frequency, BPFI:9.88 Hz; da max:33 mm; Dynamic load, C:4.7 kN; ra max:0.3 mm; d:30 mm; Nlim (grease):15,000 rpm; |
| Photovoltaic Halogen-Free Cable Manufacturing Machine | S:4.763 mm; H2:60.325 mm; PG:1/4 NPT; P120°:125 kN; RG:1/2 NPT; da:114.3 mm; L:466.725 mm; Initial grease fill:382.73 g; Labyrinth ring:2 x LOR 118; Max. speed for PosiTrac Plus seal:1300 r/min; |