| Insulated Core Wire, Electronic Wire, Power Wire Extrusion Machines | Characteristic cage frequency, FTF:0.42 Hz; Mass:0.38 kg; Min operating temperature, Tmin:-20 °C; F:25.5 mm; C1:0.8 mm; Bearing with/without cage:Sans; Radial clearance class:CN; Brand:NTN; D:47 mm; Characteristic outer ring frequency, BPF0:7.94 Hz; |
| Photovoltaic, Non-Halogen Wire and Cable Extrusion Machines | Mass:0.04 kg; ra max:0.3 mm; Min operating temperature, Tmin:-20 °C; f0:16.1; d:45 mm; Nlim (grease):11,000 rpm; da min:47 mm; Characteristic outer ring frequency, BPF0:11.65 Hz; Brand:NTN; Da max:56 mm; |
| Photovoltaic Halogen-Free Cable Extruder Line | Nlim (grease):5,500 rpm; Dw:3.5 mm; Characteristic cage frequency, FTF:0.44 Hz; Brand:NTN; Characteristic inner ring frequency, BPFI:8.89 Hz; Characteristic outer ring frequency, BPF0:7.11 Hz; Mass:0.07 kg; Lw:25.4 mm; Minimum Buy Quantity:N/A; D:37 mm; |
| PVC/PE/PU/Nylon Wire and Cable Extruding Machines | L:108 mm; C:19.5 kN; A:33.5 mm; G:R1/8"; Designation of bearing:US206-20G2; d:31.75 mm; T max.:100 °C; A1:12 mm; s1:15 mm; S:8 mm; |
| Thin-Wall Nylon Sheath Cable Extrusion Production Line | D:42 mm; B:7 mm; Characteristic rolling element frequency, BSF:10.19 Hz; Min operating temperature, Tmin:-25 °C; Characteristic inner ring frequency, BPFI:9.88 Hz; da max:33 mm; Dynamic load, C:4.7 kN; ra max:0.3 mm; d:30 mm; Nlim (grease):15,000 rpm; |
| Cable Sheath Extruding Machines for Wire and Cable | Basic dynamic load rating C:100 kN; l7 min.:50 mm; d:40 mm; r1 min.:0.6 mm; α:6 °; Basic static load rating C0:166 kN; l3 min.:65 mm; l4 max.:194 mm; Material constant KM:330; G:M 42x3; |
| DC1500#Laminator for Hard Biscuit Forming | H:57.2 mm; H2:115 mm; B:43.5 mm; T min.:-40 °C; C0:23.2 kN; Designation of bearing:US210-30G2T04; Designation of housing:PE210N-; Weight:2.6 kg; A1:34 mm; Recommended tightening torque for set screw:8 Nm; |
| Insulated Core Wire, Electronic Wire, Power Wire Extruding Machines | A1:56.363 mm; B:4.763 mm; Hexagonal head bolts:2 x 5/8-11x1-1/4; A3:47.625 mm; L:259.563 mm; A2:38.887 mm; Mass locking plate:0.55 kg; |
| DC600#Laminator for Hard Biscuit Forming | Designation of bearing:UC328G2L3; L3:255 mm; L1:315 mm; s1:72.5 mm; A1:50 mm; SW:10 mm; H2:230 mm; B:145 mm; Recommended tightening torque for set screw:120 Nm; L2:52 mm; |
| Gauge Roll for Hard Biscuit | Basic dynamic load rating C:11800 kN; Limiting speed:560 r/min; d:630 mm; Mass bearing:1056 kg; Da min.:868 mm; ra max.:6 mm; s1 max.:23.8 mm; D:1030 mm; Misalignment factor k1:0; Reference speed:400 r/min; |