| No. | Brand | e | N | m | a | C | Z | h | A |
| GP11 | - | - | 18mm | - | - | 52.5 kN | - | - | 50.4 mm |
| S3ll | - | - | - | - | - | - | 29.5 mm | - | - |
| TS-V-600 | - | - | - | - | - | - | - | - | 33.7 mm |
| 400 | - | - | - | - | - | - | - | - | - |
| GH150 | - | - | 12mm | - | - | - | - | - | - |
| P9 | - | - | - | - | - | - | - | - | - |
| V30 | - | - | - | - | - | - | - | - | - |
| 555 | - | - | - | - | - | 52.5 kN | - | - | - |
| 400 | SKF | - | - | - | - | 31.85 kN | - | - | - |
| s9II | - | - | 16mm | - | - | 14 kN | 24.2 mm | - | 27 mm |
| GI40(Old | - | - | - | - | 321 mm | - | - | - | - |
| S3ll/S800 | - | - | - | - | - | - | - | 44.45 mm | - |
| 200DAC | - | - | - | - | - | - | - | - | - |
| S9i | - | - | - | - | - | - | - | - | - |
| GI40(Old | - | - | - | - | - | - | - | - | - |
| S3A | - | - | - | - | - | 14 kN | 17 mm | - | - |
| i70 | - | - | - | - | - | - | - | - | - |
| GI150/2(LG15) | - | - | - | - | - | - | - | - | - |
| S3ll | - | - | - | - | - | - | - | - | - |
| T15Plus | - | - | - | - | - | - | - | - | - |
| "SA-02" | - | - | - | - | - | - | - | - | - |
| 400 | - | - | - | - | - | - | - | - | - |
| V2X | - | - | - | 5.5 mm | - | - | - | - | - |
| MEWOI-WBGT2019A | - | - | - | - | - | - | 90.6 mm | - | - |
| R100 | - | 16 mm | 13.5mm | - | - | - | - | - | 27 mm |
| TS-V-600 multifunctional condition monitoring and protection device | C0:15.2 kN; s1:16 mm; Designation of housing:FLE207N-; A2:43.5 mm; Recommended tightening torque for set screw:8 Nm; Designation of closed end cover:SCC207; H:155 mm; L:92 mm; A:33.7 mm; S:8.5 mm; |
| Surface roughness | Designation of bearing:UC212G2; Weight:4.23 kg; Recommended tightening torque for set screw:22 Nm; H2:138 mm; J:114 mm; A:68 mm; B:65.1 mm; H:69.9 mm; L1:52 mm; C0:32.8 kN; |
| 555 channels support tilt survey stonex S3ll gnss rtk | C0:32.8 kN; T max.:200 °C; d:61.91 mm; T min.:-20 °C; C:52.5 kN; B:53.7 mm; S:14.9 mm; s1:26.85 mm; Weight:1.22 kg; A5:38.8 mm; |
| Stonex high-performance GNSS stonex S3A | C:14 kN; Recommended tightening torque for set screw:5.5 Nm; L:264 mm; H:78 mm; T max.:200 °C; A5:19.7 mm; Z:17 mm; S:14.3 mm; T min.:-20 °C; Designation of bearing:UC205G2T20; |
| World-wide renown hemp chromatograph precise and exact hplc instrument | d1:37.4 mm; B:21.4 mm; Designation of bearing:ES205G2; H1:14.5 mm; S:7.5 mm; C:14 kN; T max.:100 °C; C0:7.88 kN; H:36.5 mm; L1:39 mm; |
| stonex S3ll efficiency RTK | S:14.3 mm; Designation of housing:FE206N-; L:108 mm; s1:17 mm; d:22.22 mm; J:82.5 mm; Recommended tightening torque for set screw:3.7 Nm; G:R1/8"; Weight:1.01 kg; Z:29.5 mm; |
| GI150/2(LG15) Intrinsically Safe Explosion-proof Integrative Acoustic Emission Sensor with Frequency 60KHz~400KHz | L:99 mm; Weight:0.71 kg; Recommended tightening torque for set screw:3.7 Nm; G1:M20; s1:17 mm; E:22 mm; C0:7.88 kN; A2:35 mm; T min.:-40 °C; H:70 mm; |
| Best Quality Trimble GPS l1 i90 CHCNAV Dgps | Radial clearance class:C3; Static load, C0:2.39 kN; ra max:0.3 mm; d:12 mm; da max:16 mm; rs min:0.3 mm; Characteristic inner ring frequency, BPFI:4.93 Hz; Fatigue limit load, Cu:0.11 kN; Da max:26 mm; Brand:NTN; |
| Grease packer To lubricate open bearings is a low pressure alternative LAGP 400 | Brand:SNR; D:140 mm; Min operating temperature, Tmin:-40 °C; d1:82.2 mm; ra max:2 mm; d:65 mm; Max operating temperature, Tmax:120 °C; Fatigue limit load, Cu:2.7 kN; Characteristic outer ring frequency, BPF0:3.07 Hz; Mass:2.11 kg; |
| eSurvey GPS GPRS P9 Pro HANDHELD GNSS CAMERA | rs min:0.3 mm; Brand:NTN; F:20 mm; da min:19 mm; ras max:0.3 mm; Lubrication hole on inner ring:Non/No; B:16 mm; Precision class:P0; t:1.5 mm; d:17 mm; |
High Precision handheld GPS GIS data collector T15Plus Handheld GNSS GPS Surveying Instrument Video